Fritsch SMT Solutions
 |
placeAll SMT Solutions
For over 30 years Fritsch has produced complete and flexible SMT solutions. placePRO and placeALL equipment handle chips 0201 up to fine pitch components 70x70mm, pitch 0.3mm, BGAs, BGAs, CSPs, QFNs, and custom parts like connectors and wired THT-LEDs.
placePRO and all placeALL models can be used as standalone equipment, or integrated into an assembly line. Optional dispenser available on all models.
|
placePRO® 510
Combining the advantages of manual placement with the precision of automatic placement the placePRO® is designed as a bridge between manual and fully-automatic placement equipment. It is ideal for prototypes and small volume PCB requirements.
Fast changeover times and user friendly software. Up to 4,000cph.
placePRO uses the same feeders as the placeALL line of equipment.
|
|
placeALL® 515
The placeALL®515 pick-&-place system is especially useful for building prototypes and small batches. It supports a wide range of components for even the most complex tasks. Up to 4,000cph.
Intelligent software and up to 200 possible feeder positions (8mm tape) minimize changeover times.
|
|
placeALL® 610
The placeALL®610 can be used for the assembly of prototypes and small batches.
With a wide range of supported components and up to 208 possible feeder positions (8mm tape), even complex tasks can be assembled.
Up to 10,500cph with second pick-&-place head.
|
 . placeALL® 610L
The placeALL® 610L has a wider assembly area than the placeALL® 610. Feeder positions are increased to 284 & a maximum of 6 trays. As an option, the entire assembly field can be used to assemble large PCBs (up to 1020 x 450mm).
Up to 10,500cph with a second pick-&-place head.
|
 . placeALL® 610XL
The placeALL®610XL offers the largest assembly area of the 610 Series. Its dimensions of up to 1020 x 690mm enable the assembly of the largest projects.
With 346 feeder positions (8mm tape) (262 when used in-line) and intelligent software, changeover times can be reduced to a minimum.
|
|
placeALL®700
The placeALL700® is based on the most modern techniques in axis drive & control. Up to four assembly heads makes this the optimum machine for flexible & precise SMD production of medium & large batches. It has a modular structure & proves assembly quantity of up to 14,000cph (with 4 heads).
Placement area up to 520 x 450mm. Maximum 208 slots for 8mm tape feeders.
The available hardware options and software modules like PATrace, PAStorage, PAJob etc. and feeders are the same as placeALL® 510/610.
Under Development |
|
Feeder Systems
placePRO® and placeALL® equipment offers the right feeder for every SMD model. The feeder system includes feeders for reels, sticks, trays, and loose components. |
|
